Factory Rent TN03

Factory Rent TN03
37 Ton Duc Thang St, Ben Nghe Ward, District 1, Ho Chi Minh City, Vietnam
For Rent - Factory For Rent
3,952sq.m - 11,856sq.m 19,510

Factory Rent TN03: A brand new factory for rent in Tay Ninh Province, Viet Nam. Adjacent to Cambodia Country and Long An and Binh Duong provinces. Neighboring with Cu Chi District, Ho Chi Minh City. Located along the Trans-Asia Highway, convenient transportation system:

  • 5 km from the center of Ho Chi Minh City
  • 37 km from Tan Son Nhat International Airport
  • 50 km from HCMC container port
  • 28 km from Moc Bai International Border Gate
  • 90 km away from Xa Mat International Border Gate
  • 50 km from Tay Ninh’s Center

Factory Rent TN03 Specification:

Total land area: 19,510sq.m (L150m x W130.06m) is subdivided into 3 building blocks by high grade concrete internal road (30MPA). The lot is fenced with a powered main gate.

Of the 3 buildings, three are of the same size all having a workshop and an office.

In addition, there are:

  • A shaded Employee Parking (3m x 44m =132m).
  • Time Card Punching Area (3m x 2m=6m).
  • One separate employee area (8m x 5m=40m).
  • Parking for cars
  • Guard house at the main entrance.
  • Canteen and kitchen for workers. (Optional)
  • Restroom block for workers. (Optional)
  • Large yard for truck loading.
  • Electricity Room (8.m x 6m=48m), underground reservoir and water tower, not shown in the diagram.
  • Workshop’s size= (104m x 38m)= 3,952m
  • Office’s size=1st floor+2nd floor=(12m x 28m)+(12m x 28m) = 336sq.m + m = 672sq.m
  • All building roofs have the lowest point of 9.0m and the highest point of 14.0m.
  • Walls and Columns are made by concrete, cover with high quality coating.
  • Factory’s floor is finished by Cement Mable (50MPA).
  • Can be subleased or buyout.
  • A complete and running facility for rent/lease/sale including forklift, van, built-in air compressor pipes, pre-wired electricity lines. (Optional)
  • Loading capacity 10 tons/㎡
  • The crane, hoist and lift. (Optional)
  • The power supply. (400KVA)
  • Fire safety. (Fire Sprinkler system is Optional)
  • Pumping and water extraction. (2 kg/c㎡)
  • Water treatment and drain water system.
  • Sewage system.
  • Lighting system.
  • The installation of plumbing.
  • The telecommunications infrastructure internet and CCTV systems
  • The treatment of chemical waste. (Optional)
  • The sanitary installation. (2 WCs for workshop and 1 WC for Office)
  • Protection against lightning, and earthling system
  • The insulation of the roof (air bubble sheet) and walls (insulating paint – exterior).
  • The air conditioning system (Optional)
  • Workshop’s ceiling height is 9m. Office’s ceiling height is 3m.

Factory Rent TN03 Utilities:

– Public electricity with capacity 400KVA for each workshop, 3 time zones of price (including VAT 10%)

  • Normal hours 957VND/KWH: Mon-Sat, 4:00am-9:30am, 11:30am-5:00pm, 8:00pm-10:00pm; Sunday: 4:00am-10:00pm
  • Peak hours 2230.5VND/KWH: Mon-Sat, 9:30am-11:30am, 5:00pm-8:00pm
  • Non-peak hours 650.5VND/KWH: Mon-Sun, 10:00pm-4:00am

– Public water with price (including VAT 10%): 7.819,5VND/m3

– Waste water treatment fee (including VAT 10%): 8.500VND/m3

Selling Price:

The price = 1.3 million USD (Exclusive of VAT 10%) for one Factory with office. If to buy the whole project (3 Factories with Offices) then the price is 3.6 million USD (Exclusive of VAT 10%),

Rental price: Please kindly contact our agent for updating rental price.

Noted: Information about the property and its availability are subject to change without notice.

Please contact to our agent for any further information of Factory Rent TN03  

Terms of Service: We, PDIndustrials Co., Ltd will take a-half (½) month rental (For first month only), plus VAT and management fee, from the tenant for successful recommendation. 

The commission will be paid by the tenant to PDIndustrials Co., Ltd, when tenant signs the lease contract or pays security deposit, whichever comes earlier.

Property on Map

Agent

Contact

Latest Properties